Przygotowanie
Przygotowanie przed lotem bezzałogowego statku powietrznego
8 min czytania2026-08-06
🇳🇱
Najważniejsze
Maks. wysokość
120 m
Odległość od miast
≥ 150 m
Tryb lotu
VLOS
Przed lotem
Mapa stref geo
1. Legal requirements and registration
Obowiązek rejestracji
- UAS over 250 g
- Any UAS with a camera (non-toy)
Otrzymujesz
- Operator ID number
- Mark ID on aircraft or case
Przed pierwszym lotem
- Pick Open / Specific category
- Check geo-zones & insurance
Before flying, ensure you meet EU unmanned aircraft system (UAS) requirements in Holandii:
- Registration: UAS with a camera or weighing more than 250 g must be registered as a UAS operator via the national system / EASA.
- Category: determine whether you fly under Open, Specific, or Certified category rules.
- Insurance: civil liability insurance is recommended, especially for commercial flights.
- Flight authorisations: Specific category operations may require operational authorisation.
Always verify current requirements with Human Environment and Transport Inspectorate (ILT) and EASA.
2. Airspace and zone verification
Przewodnik kolorów stref geo
Zakaz
Lot BSP bez specjalnego zezwolenia zabroniony
Ograniczony
Wymagane zezwolenie lub sprawdzenie NOTAM
Wrażliwa
Rezerwaty, granice, infrastruktura
Otwarta (z zasadami)
Kategoria Open A3 przy zachowaniu odległości i wysokości
For every flight you must verify that the location is permitted for UAS operations in Holandii:
- Use the official UAS geo-zone map showing prohibited, restricted, and sensitive areas.
- Check nearby aerodromes: AMS, RTM, EIN, GRQ, MST — controlled or restricted airspace applies around them.
- Review NOTAM notices for temporary flight restrictions.
- Consider altitude: Open category A1/A3 typically up to 120 m AGL, at least 150 m from urban areas (A3).
- Avoid flying over crowds, military sites, critical infrastructure, and private property without permission.
3. Aircraft technical inspection
Before every flight inspect your UAS:
- Propellers and motors — no cracks, debris, or looseness
- Battery — charged, undamaged, correctly inserted
- GPS / compass calibration in an open area away from metal structures
- Return-to-home (RTH) and failsafe settings verified
- Firmware and remote controller updated
- Camera gimbal and sensors clean and secure
