Preparazione
Preparazione pre-volo per aeromobili a pilotaggio remoto
8 min di lettura2026-08-06
🇭🇷
Dati chiave
Altitudine max
120 m
Distanza urbana
≥ 150 m
Modalità di volo
VLOS
Prima del volo
Mappa geo-zone
1. Legal requirements and registration
Registrazione obbligatoria
- UAS over 250 g
- Any UAS with a camera (non-toy)
Ricevi
- Operator ID number
- Mark ID on aircraft or case
Prima del primo volo
- Pick Open / Specific category
- Check geo-zones & insurance
Before flying, ensure you meet EU unmanned aircraft system (UAS) requirements in Croazia:
- Registration: UAS with a camera or weighing more than 250 g must be registered as a UAS operator via the national system / EASA.
- Category: determine whether you fly under Open, Specific, or Certified category rules.
- Insurance: civil liability insurance is recommended, especially for commercial flights.
- Flight authorisations: Specific category operations may require operational authorisation.
Always verify current requirements with Croatian Civil Aviation Agency and EASA.
2. Airspace and zone verification
Guida colori geo-zone
Vietato
Volo UAS vietato senza autorizzazione speciale
Limitato
Permesso o controllo NOTAM richiesto
Sensibile
Riserve naturali, confini, infrastrutture
Aperto (con regole)
Categoria Open A3 rispettando distanza e altitudine
For every flight you must verify that the location is permitted for UAS operations in Croazia:
- Use the official UAS geo-zone map showing prohibited, restricted, and sensitive areas.
- Check nearby aerodromes: ZAG, SPU, RJK — controlled or restricted airspace applies around them.
- Review NOTAM notices for temporary flight restrictions.
- Consider altitude: Open category A1/A3 typically up to 120 m AGL, at least 150 m from urban areas (A3).
- Avoid flying over crowds, military sites, critical infrastructure, and private property without permission.
3. Aircraft technical inspection
Before every flight inspect your UAS:
- Propellers and motors — no cracks, debris, or looseness
- Battery — charged, undamaged, correctly inserted
- GPS / compass calibration in an open area away from metal structures
- Return-to-home (RTH) and failsafe settings verified
- Firmware and remote controller updated
- Camera gimbal and sensors clean and secure
